skip to Main Content

TMI Applies FIBERLIFE to Containment Dikes

A manufacturer and distributor of water treatment chemicals requested TMI Coatings, Inc. (TMI) line their secondary containment dikes located in St. Paul, MN and Houston, TX.  The containment areas store harsh chemicals such as hydrofluorosilicic acid, caustic soda liquid, sodium hydroxide and various other chemicals.  TMI high pressure washed the entire containment area to remove chemical residue that may have absorbed into the concrete.  TMI then mechanically abraded the floor and walls to clean and roughen to create an anchor pattern for long term adhesion of the lining material.  Severely cracked and eroded areas were restored to the surrounding plane.  TMI then installed FIBERLIFE, which is a vinyl ester, chemical resistant primer and multiple coats of vinyl ester resin with mat/aggregate fillers at an average 1/8″ thickness.  FIBERLIFE is suitable for splash and spill of harsh chemicals.  The customer stated, “The crew worked very well with our coordinator for the execution of this project.”  The customer said he will use TMI to install protective coatings at their other locations.

Containment dike

Anaerobic Digesters And Sludge Tank

Anaerobic Digesters And Sludge Tank

TMI Coatings, Inc. recently completed a repainting project for the City of Lincoln, Nebraska at a Water Resource Recovery Facility.  The project consisted of re-coating the exteriors of three anaerobic…

read more
Back To Top