TMI Coatings recently completed a large coating project at an ammonia storage facility in Grand Forks, ND. The project consisted of a substantial amount of linear footage of various-sized piping to be sandblasted before applying three-coat zinc, epoxy, and urethane system. The dome portion of a large storage tank, over 16,000 sq. ft., was water blasted with 4,000 psi washers, and rust areas were mechanically abraded to SSPC-SP3 before coating application. TMI then applied three full coats of the specified coating material per the manufacturer’s recommendation.
Indoor Pipe Painting Project with Tnemec
TMI Coatings, Inc. (TMI) was contracted to coat several hundred linear feet of large-diameter piping with a Tnemec coating system.
