Facebook pixel skip to Main Content

Painting Fuel Oil Tanks in LA

Facebook
Twitter
LinkedIn

TMI Coatings was selected to prepare the surface and coat the exterior of (14) horizontal storage tanks including ancillary piping, valves, pumps, fuel skid equipment, etc. The tanks sizes were from 12,000 to 30,000 gallon capacity. The scope of work consisted of SSPC-SP2 hand tool cleaning, SSPC-SP3 power tool clean, SSPC-SP12/NACE 5 surface preparation by high pressure water jet. TMI prepared surfaces then installed one full coat of epoxy primer. TMI then applied a top coat of a high solids polyurethane finish coat as specified by owner. On the stairways, handrails, ladders, platforms TMI coated OSHA safety yellow in color. TMI then installed lettering as specified by owner. TMI completed this project in a timely manner and worked closely with the NACE level third party inspector overseeing the project.

The owner said, “I want to mention that I am very impressed with your crew’s work performance and work ethic that has been exhibited on this recoat project at Chennault International Airport.  I will say that in my 25 yrs. of professional services in the engineering field, your company is the 1st “paint-coatings” company that has really impressed me in a heavy commercial/industrial setting.”

Randal C. Liprie, P.E.
Liprie Engineering, LLC

Back To Top