Facebook pixel

TMI Coatings Project 20 Years Later

Facebook
Twitter
LinkedIn

In 1999, TMI Coatings was contracted to prepare and recoat the exterior of two large dust collectors. The steel structures were experiencing corrosion and TMI determined a long term solution that required minimal maintenance for the company.

Procedure:

  1. TMI high pressure washed with 4,000 psi pressure washers and removed all inferior existing paint coatings, dust, dirt, and debris
  2. TMI further mechanically abraded to remove any surface rust
  3. TMI applied one full epoxy primer coat to the entire structure of the dust collectors by brush and roll to reduce the risk of overspray to a nearby building
  4. TMI then applied one full topcoat of a high quality urethane paint to the entire exterior of the dust collector providing very good corrosion protection and color stability

Outcome:

Over 20 years since the project was originally completed, TMI recently visited the site for an assessment.  The dust collectors showed very minimal corrosion and no flaking or peeling paint. TMI can provide a long lasting and durable solution as we did for this company.  Our previous work is a testament to the quality we provide our customers.

tmi coatings dust collector coating exterior 2    tmi coatings dust collector coating exterior 3

With 35 years of experience, TMI Coatings will have your project completed on time and within budget. Contact us today at 651-452-6100 for your free, no obligation quote.

 

Back To Top