Cementitious Urethane Floor Coating
TMI Coatings field crews have considerable experience installing 100% solids, cementitious urethane floor topping that is trowel and/or squeegee applied, depending upon the customer’s environment. Cementitious urethane floor topping is designed to withstand aggressive chemical and thermal attacks while providing abrasion resistance. An optional integral cant or cove is available. TMI cementitious urethane is highly resistant to moisture (high water vapor transmission), withstanding 20 lbs. /1,000 sq. ft./24 hours using the calcium chloride test per ASTM F-1869 or 99% relative humidity using in-situ Relative Humidity Testing per ASTM F-2170.
TMI cementitious urethane flooring can be applied to 7-day-old concrete.
Benefits of Cementitious Urethane Flooring:
• Can withstand up to 20lbs. vapor pressure/1,000 sq.ft./24 hours
• Low odor
• Can be installed on new concrete (7-day-old concrete)
• Co-efficient of thermal expansion similar to concrete
• Superior adhesion
• Superior chemical resistance
• Extremely durable
• Thermal shock resistant
• Tolerates dampness
Uses of Cementitious Urethane Flooring:
• Commercial kitchens
• Food processing areas
• Cook/chill areas
• Bottling areas
• Sanitize/wash areas
• Manufacturing plants
• Chemical environments
Learn More About TMI Cementitious Urethane Floor Topping
Film Packaging Company Reduces Corrosion on Metal Silos and Waterproofs Chime
Upon TMI Coatings, Inc. (TMI) completion of work Mark Laughlin, the film packaging company representative said, “It seemed to go really well. It was a good crew.” TMI, a painting and restoration contractor was contacted by North America’s leading producer of film packaging to restore seven of their silos that were in rough shape. The…
Concrete Pond Coating for Insurance Company
A large life insurance company in Minneapolis, MN, contracted TMI Coatings, Inc. (TMI) to restore and coat a decorative concrete pond in their courtyard. The concrete pond had begun to crack and erode due to constant water immersion. After visiting the site, discussing with the owner, and understanding the application, TMI elected to install a…
Concrete Silo Roofs Coated to Withstand Ponding Water
A billion-dollar grain company hired TMI Coatings, Inc. (TMI) to restore a quarter-mile of their concrete silo roofs. These concrete silos store grain: therefore, a durable and properly coated roof is necessary. The cooperative’s concrete silo roofs were leaking because of the previous coatings age and inability to withstand ponding water. TMI suggested using a…
Tank Farm Painting in Texas for a Plastic Manufacturer
A large plastic manufacturer contracted TMI Coatings, Inc. (TMI) to restore their steel silos. The silos were experiencing extensive corrosion causing leaking through their roofs and rust along the chime of the tanks. To combat these issues, TMI elected to use a two-coat rust inhibitive epoxy paint on the shell of the tank and urethane…
Silo Base Coating and Restoration by TMI Coatings
A large manufacturing plant contracted TMI Coatings, Inc. (TMI) to complete a silo base coating project on the interior and exterior of several large silos. The project consisted of six large silos. The chime long the base of the silos had developed lots of rust over the years. The Owner requested for TMI to remove…
Steel Sump Tank Lining
TMI Coatings, Inc. (TMI) was recently contracted to coat the interior of a steel sump tank on the interior of a facility. The sump tank was experiencing corrosion as the old system had failed and started to flake off. Time was the biggest factor in completing this project, the customer couldn’t be without this piece…
Cooling Tower Basin Restoration and Lining
Years of abuse and chemicals used in treat the water led the concrete in the massive cooling tower to degrade. Concrete is a naturally porous substrate, without protecting it it is susceptible to erosion and degradation. TMI Coatings, Inc. (TMI) completed extensive restoration to this concrete cooling tower basin at an oilseed processing plant. Procedure:…
Silo Skirt Restoration and Roof Coating Project
TMI Coatings, Inc. (TMI) completed silo skirt waterproofing and painting a group of resin silos for a plastic film manufacturing company. The interior and exterior of the silos the silo skirt areas were experiencing excessive corrosion. To combat the rust, TMI properly prepared surface and applied coatings per manufacturers’ recommendation. Procedure for the Silo Painting:…
Water Reservoir Rehabilitation Project
TMI Coatings, Inc. (TMI) recently completed a project rehabilitating two (2) water reservoir tanks for Muscatine Power & Water in Muscatine, Iowa. The project included cleaning and recoating the exterior and interior of two (2) 1.5 million-gallon round concrete water reservoir tanks, installing elastomeric liners on floor joints, repairing cracks, and recoating the domes. The…
Floor Sloping Eliminates Concerns
A Midwestern cheese plant had standing water on the floor of their production entryway and packaging area. The plant employees were standing in the water in order to cut the cheese. There were sanitary concerns due to splashing of standing water into the cheese carts where the blocks of cheese are temporarily stored before slicing.…
Diesel Fuel Tanks Repainted Safely by TMI
TMI Coatings, Inc. (TMI) coated two diesel fuel tanks for a large food company. TMI applied epoxy primer and a quality topcoat to the exterior of the tanks and the piping attached to them. The company was very concerned about our men’s safety while working around the diesel fuel tanks. After submitting our proposal to…
Fixing a Leaky Corrugated Metal Roof
An energy company hired TMI Coatings to repair the corrugated metal roof of their shop building that was experiencing leaking problems. TMI cleaned the roof and then replaced all missing fasteners and resecured remaining fasteners on the roof. A urethane elastomer coating was applied to all seams and around all penetrations to provide a waterproof…
