skip to Main Content

Epoxy Floor Coating

Primer/Sealers and High Build Epoxy Coating for a glossy, tile-like finish

Safe Non-Skid Floor Coating

TMI CHEM-RESIST is recommended for floors subjected to heavy traffic, chemicals, areas requiring a safe, non-skid surface. This coating is durable, sanitary and easy to clean.

TMI 100% solids CHEM-RESIST epoxy flooring will protect your concrete floor from everyday wear-and-tear. 100% solids means minimal solvents are used during mixing and therefore no unpleasant odors are emitted during application. The glossy, seamless finish is easy to clean and sanitize. Antimicrobial additives can be incorporated, the flooring is USDA approved for use in food environments. Add aggregate for a slip resistant finish for safety.

CHEM-RESIST is available in clear and a variety of colors. TMI can match any color to meet a customer’s preference.

Benefits of TMI CHEM-RESIST Epoxy Flooring:

  • Fast curing for shorter down times
  • No odor, will not affect taste of food during installation and cure time
  • Tenacious bonding quality
  • Minimizes concrete dusting allowing for easier cleaning
  • Can be applied to new and used concrete

Methods of Surface Preparation Before Applying Flooring

 

 

Degrease
To remove grease and oil from substrate.

Acid Etch
Older technology; used to neutralize concrete. Concrete is an alkaline material and by acid etching, the floor is neutralized.

Shotblast
Dust-free removal of old floor coatings; used on new concrete to clean and roughen for maximum flooring adhesion.

Grind
Hard-to-reach areas (around columns, equipment legs, perimeter walls, etc.) where the shotblaster can’t reach are hand ground with vacuum shrouded 4” to 7” grinders or TMI’s walk behind diamond grinder unit with 5 independent rotating heads is used for old floor coating removal. This unit is ideal for large (greater than 3,000 sq. ft. ) concrete floors to remove mastics, thin-set, heavy mil coatings and high spots. It has a variable speed drive which is especially helpful when the floor has been previously coated.

Machine Sand
Large, walk-behind 20-30-inch sanding discs with varying degrees of coarseness are used to prepare concrete substrates.

TMI CHEM-RESIST Epoxy Flooring

TMI CHEM-RESIST Epoxy Quartz Flooring

TMI CHEM-RESIST epoxy quartz flooring uses a water clear epoxy resin and colored quartz aggregate for a decorative, commercial-like finish. Epoxy flooring with colored quartz aggregate forms a seamless surface with a high quality, clear, 100% solid epoxy binder and top coat. The finished texture of this decorative, extremely durable surface can be standard non-skid or can be applied for a smooth finish.

Features of TMI CHEM-RESIST Epoxy Quartz Flooring:

  • Lower maintenance costs, no waxing or stripping
  • Very durable
  • Decorative
  • Easy to keep sanitary

Uses of TMI CHEM-RESIST Epoxy Quartz Flooring:

  • Pool decks
  • Jail cells
  • Conference rooms
  • Laboratories
  • Hallways
  • Lunchrooms

TMI CHEM-RESIST Novolac Epoxy Flooring

TMI CHEM-RESIST Novolac epoxy flooring will protect your concrete floor from most solvents and most organic and inorganic acids including splash and spill of 98% sulfuric acid. In addition to the superior chemical resistance, heat distortion resistance is also greatly improved. CHEM-RESIST Novolac is commonly installed as a top coat to improve chemical resistance. Novolac has very good stain resistance.

TMI CHEM-RESIST Novolac is a low odor, 100% solids epoxy formulation. 100% solids means no solvents are used during mixing and therefore no unpleasant odors are emitted during application.

Uses For TMI CHEM-RESIST Novolac:

• Battery Charge Areas
• Laboratories

Per Eric Anderson, November 2, 2017,

“Floor looks beautiful! Nice and clean, perfect! TMI Coatings did a great job. I have no complaints and couldn’t be happier with it. Only problem is that it brought to light the other areas in the facility that we should get addressed.”

Epoxy Floor Coating Evaluation by McNally

Learn More About TMI Epoxy Floor Coating

Tank Farm Painting in Texas for a Plastic Manufacturer

A large plastic manufacturer contracted TMI Coatings, Inc. (TMI) to restore their steel silos. The silos were experiencing extensive corrosion causing leaking through their roofs and rust along the chime of the tanks. To combat these issues, TMI elected to use a two-coat rust inhibitive epoxy paint on the shell of the tank and urethane…

Meat Production Facility Ceiling Restoration Project

TMI Coatings, Inc. (TMI) was contracted to repair, restore, and coat the ceiling of a meat production facility for one of the largest meat suppliers in the U.S. The ceiling had experienced significant deterioration to dozens of areas on the concrete ceiling. As a result of the deterioration, the structural integrity of the ceiling was…

Restoration Project Completed Over Memorial Day Weekend

A large agri-food company contracted TMI Coatings, Inc. (TMI) to complete a restoration project on their crane rails and a severely eroded floor in their production area. The flooring was in poor shape due to the years of hard abuse. The crane rails were in rough shape due to the grease, high moisture, and low…

Metal Ceiling Painting Project at a Chemical Facility

Sunburst Chemicals recently contracted TMI Coatings, Inc. (TMI) to complete a metal ceiling painting project in one of their production packaging rooms. TMI has completed a metal ceiling painting project for Sunburst Chemicals in the past. They were happy with TMI’s work and communication in the past that they placed an additional order with us…

Pool Restoration Project for City of Fargo

The City of Fargo Park District hired TMI Coatings, Inc. (TMI) to complete a pool restoration project on an outdoor pool.  The city wanted the project done right away so it would be ready before Memorial Day weekend opening. Due to the cool temperatures in North Dakota during May, TMI used an accelerator that allowed…

Coating Storage Tanks for Global Innovation Company

A global innovation company in the Midwest requested that TMI Coatings Inc. (TMI) coat the exterior of four above ground storage tanks. To abide by local regulations and the Wisconsin DNR, they were required to remove the rust from the tanks due to potential contamination of ground water. After arriving on site for the initial…

Eliminate Peeling Paint with FIBERLIFE

When peeling paint is recurring, it becomes quite clear that a longer term solution is needed. However, some companies use products that only provide a quick fix. Often times this results in maintenance after just a couple years. One of our products, FIBERLIFE, was specifically designed to be as durable as possible, utilizing fiberglass mat.…

Mechanical Room Flooring

Has your concrete seen better days? Say goodbye to your eroded, worn and chipped flooring. With over 35 years of experience, TMI Coatings has the expertise to schedule and complete jobs with the least amount of disruption – even in busy settings. Aspirus Hospital called on TMI Coatings to restore concrete flooring in a large…

Easy-to-Clean Epoxy Coating System

Great Lake Cheese, a food manufacturer, had existing coatings fail due to moisture accumulation on their ceiling beams resulting in severe corrosion. The company asked TMI Coatings, Inc. (TMI) to restore their deteriorating ceiling beams and install a rust-inhibitive coating that would prevent similar issues in the future. Procedure: Removed all plaster and metal lath…

Food Processing Plant Receives New Epoxy Coating

TMI Coatings, Inc. (TMI) was contracted by Zummo Meat, a food processing plant located in Texas. In one of their facilities, the company was experiencing flaking paint, damaged bricks, and missing mortar that needed to be replaced. TMI had a solution, restore the brick and mortar, plus install a new epoxy coating system. Upon completion,…

Reduce Corrosion Under Insulation on a Storage Tank

A fuel terminal company contracted TMI Coatings, Inc. (TMI) to perform various repairs on a caustic materials storage tank. TMI performed spot repairs on the interior tank lining. To the exterior, TMI applied a thermal coating to the tank’s lower uninsulated section and waterproof material to the tank’s base and concrete pad juncture, as well…

Silo Skirt Restoration and Roof Coating Project

Rust – no more. TMI Coatings completed silo skirt restoration and painting a group of resin silos for a plastic film manufacturing company. On the interior and exterior of seven welded steel silos’ skirtings we removed the existing coating material and rust. Procedures for the silo painting: Pressure washed the silos with 4,000psi pressure washers…

Dairy Floor Restoration and Floor Topping

TMI Coatings prepared and installed floor toppings in multiple rooms throughout a large dairy processing plant.  An epoxy system was installed in areas of the plant which remain dry and a cementitious urethane floor topping system was installed in a different room in the facility which encounters more traffic, constant moisture and a more rigorous…

Concrete Coating Project of the Year

We want to recognize TMI Coatings Superintendent Jeff Henry and the floor coating team for the project of the year. TMI previously installed concrete coatings in the sensor and electrode fabrication shop for Pepin Manufacturing in Lake City with good results so they requested TMI to install the same coatings in their new 14,000 square…

Industrial Filter Manufacturer Floor

A large industrial filter manufacturer requested that TMI Coatings remove existing flooring and install new floor coating: clear and colored to improve light reflectivity and allow for easier cleaning for a lean environment. 16,835 sq. ft. of old flooring was removed and new flooring material was installed.  TMI proceeded to remove the existing flooring by…

TMI Installs Sloped Flooring at a Fortune 500 Company

A Fortune 500 Company was renovating their (5) air handler units in one of their corporate buildings due to corrosion issues. TMI Coatings, Inc. (TMI) was hired to install a liquid applied coating system that would slope the floor of the air handler units towards the existing drains. The Fortune 500 Company needed the water…

ESD Flooring in Medical Manufacturing Facility

Have you ever dreamed of sliding across your manufacturing facility floor in your socks like Tom Cruise in “Risky Business”?  It is very unlikely and this isn’t exactly the same, but TMI Coatings recently installed an Electro Static Dissipative (ESD) and epoxy floor in a medical manufacturing facility.  The ESD flooring TMI installed is designed to…

Office Renovation With TMI CHEM-RESIST Flake Floor

How can an epoxy flooring system help increase light reflectivity and at the same time create a decorative look for a professional office space?  TMI Coatings recently showed a food production facility that epoxy floor coatings are not only suitable for extreme durability in constant wear areas but can also transform a dark stained concrete…

Epoxy Sealer/Dustproofer Floor Coating

TMI Coatings removed existing peeling and flaking paint from the floor of a power generation plant in Fridley, Minnesota. TMI then applied an epoxy sealer/dustproofer to keep the dust to a minimum and help keep the floor clean. TMI was able to complete this project on short notice and during weekend hours. The site contact…

TMI Applies Epoxy Mortar Mixture to Air Handler Units

A Fortune 500 Company was renovating their (5) air handler units in one of their corporate buildings.  The company hired TMI to install liquid applied flooring sloping toward the existing drain in each of the air handler units; if the water does not drain, bacteria and allergens will be pushed throughout the system.  TMI applied an…

TMI Coatings Applies Quartz Flooring

TMI Coatings applied quartz flooring to a walkway and pool hallway for slip resistance for safety at a Wisconsin YMCA. The previous pool walkway would become slippery when wet. The owner had previously applied aluminum oxide into the floor coating but it was too coarse and hurt peoples feet as they walked on it. By…

Installing New Flooring for a Car Dealership

TMI Coatings, Inc. (TMI) was contracted in 2007 to restore a car dealership’s floor. The existing floor was showing clear signs of deterioration. The floor had become difficult to clean, and its appearance was unattractive to customers looking to purchase a vehicle. TMI recommended our CHEM-RESIST product due to its strong performance and easy-to-clean finish.…

Specialty Flooring- TMI’s CHEM-RESIST

TMI’s specialty flooring, CHEM-RESIST is a good floor solution for light industrial traffic areas and floors exposed to chemicals. This epoxy coating is durable, sanitary, and easy-to-clean. There are many options to choose from in our TMI CHEM-RESIST product line: CHEM-RESIST Non-Slip Epoxy Flooring CHEM-RESIST Smooth Epoxy Flooring CHEM-RESIST Colored Quartz Epoxy Flooring CHEM-RESIST Novolac…

Back To Top