Wet Film Thickness (WFT)
The thickness of a coating immediately after application, before solvent evaporation and cure. WFT measurement allows applicators to verify that proper dry film thickness will be achieved.
The thickness of a coating immediately after application, before solvent evaporation and cure. WFT measurement allows applicators to verify that proper dry film thickness will be achieved.
Organic chemicals that evaporate from coating materials during application and cure. VOC content is regulated by environmental agencies, and many industrial facilities require low-VOC or compliant coating systems.
A coating’s ability to withstand ultraviolet light exposure without chalking, fading, or degrading. Critical for exterior and roof coating applications.
Localized coating repair of holidays, damaged areas, or welds after the main coating application is complete.
The underlying surface being coated: steel, concrete, aluminum, or other material requiring protection.
The expected duration that a properly applied coating system will provide adequate protection before requiring maintenance or replacement, typically ranging from 10 to 20+ years depending on environment and system design.
The time period during which additional coating layers can be applied over a previous coat without special surface preparation. Outside the recoat window, surface abrasion or other preparation may be required for proper adhesion between coats.
The application of new coating layers over existing coatings. Successful overcoating requires compatibility testing, proper surface preparation, and verification that the existing coating is sound.
The amount of moisture in the air, expressed as relative humidity percentage. Coating application typically requires relative humidity below 85% to prevent moisture-related defects.
The movement of water vapor through concrete slabs, which can cause blistering and delamination of floor coatings. MVT testing and moisture mitigation are critical before applying concrete floor coating systems.