Industry: Chemical Refining

Chemical-Resistant Containment Dike Lining at Refinery Facility

Industry: Chemical Refining / Manufacturing | Service: Specialty Coatings / Containment Dike Lining | Contractor: TMI Coatings, LLC (AMPP QP 1 & QP 2 Certified)

Challenge

A chemical refinery, a repeat TMI client with facilities across the central United States, required protective lining systems for two separate secondary containment dikes at one of its operating plants. Each dike presented a different chemical exposure profile: one contained polyphosphoric acid (PPA) subject to splash, spill, and short-term immersion, while the other served as secondary containment for heat transfer oil. Both dikes had deteriorated concrete substrates with cracking at floor/wall junctures, eroded surfaces, and compromised existing coatings, creating regulatory exposure risk and the potential for environmental release in the event of a spill or process upset.

Solution

TMI Coatings, LLC (TMI) engineered and executed a dual-system containment lining scope, selecting different coating chemistries for each dike based on specific chemical exposures, temperature ranges, and immersion conditions.

PPA Containment Dike: After the owner vacated, neutralized, and cleaned the containment area, TMI prepared all surfaces by mechanically abrading with handheld diamond grinders equipped with vacuum attachments to establish an anchor pattern for coating adhesion. Crews wore full PPE, including face shields, throughout preparation. TMI routed and filled all cracks, sealed floor/wall junctures, and restored eroded concrete areas to the surrounding plane using epoxy mortar filler. TMI then primed bare concrete and applied a heavy-build urethane elastomer coating to the entire dike interior. The elastomeric system provides corrosion protection, chemical and abrasion resistance, and is engineered to expand and contract with outdoor temperature fluctuations without cracking, chipping, or peeling; a critical performance requirement for exterior containment exposed to seasonal thermal cycling.

Heat Transfer Oil Containment Dike: Following owner cleaning and power washing, TMI mechanically abraded all surfaces, including floor, sidewalls, and dike wall tops. Cracks were routed out and filled, and a flexible sealant was applied at floor/wall junctures. TMI then installed FIBERLIFE, a chemical-resistant vinyl ester fiberglass-reinforced laminate; suitable for short-term immersion of oils and engineered for long-term durability in chemically aggressive containment environments.

Result

TMI delivered both containment dike linings safely and on schedule. The plant manager confirmed satisfaction with the process from start to finish. Both dikes now carry coating systems specifically matched to their chemical exposure profiles, providing verified secondary containment integrity, corrosion protection on restored concrete substrates, and long-term compliance with environmental containment regulations. This project represents one of multiple engagements TMI has completed for this refinery client across the central United States, reflecting TMI’s position as a trusted, repeat-engagement specialty contractor for chemical processing facilities.

Why TMI Coatings

TMI Coatings is an AMPP QP 1 and QP 2 certified industrial coatings contractor with 40 years of experience in chemical refining, manufacturing, and heavy industrial environments. TMI’s technical capability includes selecting and installing multiple coating chemistries: epoxies, urethane elastomers, vinyl ester laminates, and fiberglass-reinforced systems, matched to specific chemical exposures, immersion conditions, and regulatory requirements. TMI hires, trains, and deploys its own field crews nationwide, with NACE CIP Level 3 certified inspection personnel providing in-house quality assurance.