Anaerobic Digestor Tank Lining for Biogas Operation at Dairy Farm
Industry: Agriculture / Renewable Energy / Biogas | Service: Tank Linings / Immersion-Grade Coating | Contractor: TMI Coatings, LLC (AMPP QP 1 & QP 2 Certified)
Challenge
A general contractor working for one of the world’s largest oil and gas companies was installing new above-ground anaerobic digestors at dairy farms in northwest Iowa as part of a biogas production operation. The digestors are large steel-walled tanks with sloped concrete floors. They were failing their 14-day water hold test, meaning they could not be placed into service. The GC needed a specialty contractor to line the tank interiors to achieve watertight integrity under full-immersion conditions. After nine months of coordination, TMI Coatings was awarded three separate digestor lining contracts.
Solution
TMI Coatings, LLC (TMI) mobilized to the dairy farm sites to execute the lining scope of work. The primary tank measured 95 feet in diameter by 54 feet high with a total lining area of 10,900 square feet, including the sloped concrete floor, steel walls, and approximately 60 pedestals and intrusions that had to be individually encased within the lining system.
TMI removed the existing failed polyurea coating by scraping, cutting, grinding, and abrasive blasting. Steel walls were sandblasted to SSPC-SP10 Near White Metal standards; the concrete floor was prepared to SSPC-SP13 standards. TMI verified wall profile at a minimum of 3 mils for immersion service and floor profile at CSP 4-6 using ICRI surface finish comparators: documenting compliance with the lining manufacturer’s specifications for full immersion applications. All work was performed in accordance with confined-space protocols and with continuous air monitoring.
Result
TMI completed the digestor lining projects safely and on schedule. The owner and general contractor expressed satisfaction with TMI’s safety performance, work quality, and schedule adherence throughout weekly project meetings. The lined digestors now feature an immersion-grade coating system engineered to pass the 14-day water-hold test and withstand continuous exposure to the corrosive, high-moisture environment of anaerobic digestion, enabling the biogas operation to proceed as designed.
Why TMI Coatings
TMI Coatings is an AMPP QP 1 and QP 2 certified industrial coatings contractor with 40 years of experience in tank lining, agricultural infrastructure, and energy sector environments. TMI’s immersion-grade lining capability, spanning steel, concrete, and mixed-substrate vessels, includes the surface preparation rigor, profile verification documentation, and manufacturer-specified application procedures required for vessels that must pass water hold and immersion testing. TMI hires, trains, and deploys its own field crews nationwide with NACE CIP Level 3 certified inspection personnel.