skip to Main Content

Parking Deck and Ramp Coating

Protective non-skid coating for outdoor vehicular and pedestrian traffic areas

Traffic deck coatings are installed to parking decks and ramps to protect the steel members from corrosion due to moisture entering through the concrete. Traffic deck coatings reduce water infiltration by providing a waterproof barrier; reduce freeze/thaw damage to the concrete and protect areas below from any water damage. Coatings also protect the concrete from salts and other chloride intrusion further protecting steel or rebar. Traffic deck coatings increase the life-expectancy of the concrete and reinforcing steel.

Pedestrian traffic areas: such as sidewalks, are also coated for safety by providing a non-skid surface for employees, customers and the general public.  Slips and falls are historically the highest percentage of workplace caused injuries.

Hubbard Broadcasting recommending TMI Coatings services.

Learn More About Parking Deck and Ramp Coating

Line Striping Project with CHEM-RESIST

“Everything that is done so far looks fantastic.  I have no concerns the final section would be any different.” – the owner between milestones of the line striping project. TMI Coatings, Inc. (TMI) applied a new permanent line striping in an industrial plant after the floor’s original striping had nearly faded away completely. In industrial…

Concrete Floor Repairs for School Pool Deck and Locker Rooms

TMI Coatings, Inc. (TMI) was contracted by a school to complete concrete floor repairs and recoat damaged floors in their locker rooms, entryways, and on the deck around their swimming pool. Years of constant moisture and foot traffic on these floors had significantly damaged the old flooring and made the floor appear quite unappealing. Additionally,…

Floor Restoration in a Short Period of Time

Recently, TMI Coatings, Inc. (TMI) was contracted by a milk processing company to complete a floor restoration project in a chemical storage area, however TMI could only access the area for 48 hours. TMI devised a plan to not only complete surface preparation, but also coating to completion. The Maintenance Manager stated, “The floor restoration…

Food Processing Plant Floor Rehabilitation

Over a holiday weekend, TMI Coatings, Inc. (TMI) was contracted by a food processing plant in Iowa to complete restoration on their floors in three separate areas with different flooring systems.  After the job was completed, the Lead Maintenance Manager of the food processing plant stated, “Everything looks great. We are extremely impressed with the…

Flooring Restoration: FIBERLIFE by TMI Coatings

Flooring restoration is essential for all types of manufacturing companies. Recently, an electronics manufacturing facility contracted TMI Coatings, Inc. (TMI) to provide a solution to their cracked concrete flooring. This project included two separate floors in need of restoration – a production area floor and a waste treatment room. Both floors frequently experienced heavy traffic…

Hangar Floor Restoration for US Air Force

Three semi-truck loads of flooring materials later, this 40,000 square foot decades-old hangar floor was restored to new by TMI Coatings, Inc. (TMI).  TMI completed installation weeks before the project deadline allowing for occupancy much earlier than scheduled. Safety. Quality. On-Time. For one of our largest projects completed this year, TMI installed a hybrid resinous…

Corrosion Prevention by TMI Coatings

“The coating looks good. The crew members did a great job and they were very respectful.” – Jay Kruel of Meister Cheese after the completion of the corrosion prevention project. Deterioration had set in at the base of a food processing plant’s silos after failed attempts with corrosion prevention methods. This is troublesome as corrosion…

Floor Restoration at Food Processing Plant

This is the third project TMI Coatings has completed for this wholesale food company using the same floor restoration material. The customer is happy with TMI’s workmanship and our product offerings.  The floors of this production area were battered, damaged, and had aggregate showing.  The floors were very hard to clean, and something needed to…

Structural Beams Receive a Coating Correction

After discovering failed manufacturer’s coatings in their steel stairwell stringers and associated structural beams, a large manufacturing company asked TMI Coatings, Inc. (TMI) to help correct coating failures. TMI was asked to apply epoxy coatings to protect the existing substrates and provide an aesthetic finish for the facility. Procedure:  Prepared surfaces by solvent wiping, abrading,…

Sealing Floor Aisleways

Ginger, the Continuous Improvement Manager commented, “The floor looks absolutely fantastic. Thank you, the crew was great!” There is no avoiding deterioration; concrete floors will inevitably start to crack, wear, and erode. Often, it is difficult to know what products to choose for your floor. Different flooring systems offer different benefits, and it is usually…

A 100-year-old Tool Company Hires TMI Coatings to Install Heavy Industrial Flooring

The facility manager commented on our crew’s performance, “Everything went well. The men that were on site were very good and left the area clean.” TMI Coatings, Inc (TMI) has over 35 years of experience coating industrial floors and many other types of infrastructure. The floors of industrial facilities are often battered, damaged, and abused…

Safeguards for Protecting Concrete Floors

Attractive…and hardworking! TMI Coatings offers superior products to protect concrete floors from damage due to wet conditions and chemicals that erode finishes. We install flooring systems that meet USDA, FDA and CFIA standards while guarding against corrosion, impact and thermal shock. With this project, TMI was asked by a cheese company to repair damaged concrete…

Department of Administration

A large state government building had leaking water from its air handler units.  The leaking water would run through the concrete floor into the offices below, ruining numerous ceiling tiles and causing damage to contents in the rooms below.  In the two different rooms where the air handlers were located, TMI Coating’s solution needed to…

Repainting a 50-Year-Old Arena

Are your facilities’ walls cracking, deteriorating, or simply looking too old? Interior walls are just as much subjected to deterioration as exterior walls. Keeping your structure maintained and up to date allows it to last substantially longer – and look much better! TMI Coatings, Inc. (TMI) has over 35 years of experience with restoring interior…

Mechanical Room Flooring

Has your concrete seen better days? Say goodbye to your eroded, worn and chipped flooring. With over 35 years of experience, TMI Coatings has the expertise to schedule and complete jobs with the least amount of disruption – even in busy settings. Aspirus Hospital called on TMI Coatings to restore concrete flooring in a large…

Concrete Flooring Restoration Food Manufacturing Facility

Take Care of Your Flooring For over 35 years, TMI Coatings has restored old, broken down, deteriorated floors back into the surfaces they once were. TMI has the knowledge and experience to serve you with any restoration project. A large food company had beaten down on their concrete floors with years of industrial use. The…

TMI Coatings Completes Concrete Floor Restoration for Food Packaging Facility.

TMI Coatings completed concrete floor restoration at a food packaging facility. A representative from TMI met with the customer to view damaged floor areas and provide a repair recommendation and timeline for completing the work. TMI prepared surfaces by sanding out concrete and removing all loose and damaged material. Areas were further prepared by abrading…

TMI Coatings Restores and Waterproofs Exterior Balconies

An assisted living facility contacted TMI Coatings regarding coating several residential balconies located outdoors; the railings on the balconies were failing due to extensive corrosion including some breaking off at the base.  The owner replaced all the vertical structural steel posts of the railings and had TMI coat around the bases, coat the entire patio…

Three Schools; Three Solutions

TMI Coatings takes care of restoration needs of our schools. We transform flaking paint on brick, steel and concrete into surfaces that are smooth, safe and protective. School Gym Duct and Pipe Painting Recently, TMI professionals recoated the ducts and pipes of a large gym. Due to prior improper surface preparation, we found delaminating paint…

Cargill Pedestrian Deck Restoration

TMI Coatings completed severe restoration of a concrete deck for a major Cargill port facility along the Mississippi River. TMI mechanically abraded loading dock floors and repaired damaged areas prior to installing a cementitious urethane floor topping. TMI used sloping material to reestablish the crown and drainage prior to installing floor topping to two loading…

Pharmaceutical Company Receives New Flooring in Reactor Rooms

Pharmaceutical Manufacturing Company Receives New Flooring in Reactor Rooms Lost production time is a loss in revenue. TMI Coatings has the experience needed to meet the tightest schedules. A pharmaceutical company hired us to restore eroded concrete floors and install FIBERLIFE to several floors in reactor rooms. There was only a brief window of time…

Concrete Floor Coating

Protecting Concrete Flooring in Food Manufacturing Facility The largest provider of pizza products to the convenience store industry hired TMI Coatings to protect 20,000 square feet of concrete floor in an addition to their manufacturing facility. It was essential that the coatings adhere to strict guidelines in food/beverage industry. Procedures: • Surface was abraded utilizing…

Specialty floor coatings for manufacturing

TMI Coatings has the experience and expertise to recommend and install a variety of floor coatings depending on the specific needs of your environment. Sometimes within one facility different rooms require different floor coatings. One such facility is a paper manufacturer in International Falls, MN. In a recent project, TMI installed two different types of…

New Floor Topping for Meat Cutting and Packaging Facility

Floor Protection for a Meat Cutting and Packaging Facility TMI Coatings protects concrete floors in the meat processing industry from the destructive results of freeze and thaw cycles, wet areas and chemicals. We use systems that meet USDA, FDA and CFIA standards while guarding against corrosion, impact and thermal shock. A bison meat cutting and…

Dairy Floor Restoration and Floor Topping

TMI Coatings prepared and installed floor toppings in multiple rooms throughout a large dairy processing plant.  An epoxy system was installed in areas of the plant which remain dry and a cementitious urethane floor topping system was installed in a different room in the facility which encounters more traffic, constant moisture and a more rigorous…

TMI Coatings fixes food manufacturer’s Freezer floor fast

TMI Coatings repaired the floors in the Freezer of a food manufacturer in Tulsa, OK. The customer said that the job went smoothly and that TMI was very professional. He appreciated how the TMI crew operated-—TMI was conscious of the workers in the plant and did a great job ventilating the area. The project needed…

Concrete Coating Project of the Year

We want to recognize TMI Coatings Superintendent Jeff Henry and the floor coating team for the project of the year. TMI previously installed concrete coatings in the sensor and electrode fabrication shop for Pepin Manufacturing in Lake City with good results so they requested TMI to install the same coatings in their new 14,000 square…

New Production Area flooring for healthcare packaging facility

TMI Coatings installed protective flooring in the Production Area of a healthcare packaging facility in Wisconsin. Many steps were taken by TMI to prepare the floor surface for new coating adhesion. First, TMI created an anchor pattern and removed old flooring that was loose and disbonded. To do this, we used a steel shotblaster and…

TMI Coatings protects new concrete floors in food plant

Reduce Downtime While Increasing Cement Flooring Protection From commercial kitchens to food plants, TMI Coatings protects concrete floors from the wear and tear of freeze and thaw cycles, wet processing areas and chemicals. We use systems that meet USDA, FDA and CFIA standards while guarding against corrosion, impact and thermal shock. After hearing the numerous…

Flint Hills Resources Containment Dikes

Flint Hills Resources a producer of a diverse range of fuels, and ingredient products for many household goods requested TMI Coatings line the interior of their concrete containment dikes.  The containment dikes needed a lining system that would withstand oil, caustic soda, diesel #2, HCL, Jet A fuel oil and an emulsifier/water solution.  TMI FIBERLIFEconsisting…

Urethane Floor Topping at Surly Brewing Company

TMI Coatings, Inc. recently installed a floor topping at Surly Brewing Company’s Brooklyn Center location. TMI used vacuum steel shotblasting to abrade floors for the new floor adhesion. TMI then applied a cementitious urethane topping to protect the concrete from chemical attacks, corrosion, impact and thermal shock. These toppings are seamless, durable and suitable for industrial…

Prepping Surly Brewery Floors for Cementitious Urethane Floor Topping

TMI Coatings crew member preparing Surly Brewery floor for new cementitious urethane floor topping. Mikael B., the owner representative said, “TMI Coatings did excellent work and they finished with a day to spare!”

TMI Man Mark Behrens!

Mark, TMI Man of the year for fiberglass dike lining project successful complete for Market & Johnson at Arclin in Wisconsin. The customer stated, “Everything is good. Great TMI team to work with. Thorough on explanation and procedures and did what they said they were going to do.”

Industrial Filter Manufacturer Floor

A large industrial filter manufacturer requested that TMI Coatings remove existing flooring and install new floor coating: clear and colored to improve light reflectivity and allow for easier cleaning for a lean environment. 16,835 sq. ft. of old flooring was removed and new flooring material was installed.  TMI proceeded to remove the existing flooring by…

Industrial Floor Coatings

What floor product is right for your environment?  TMI Coatings offers a variety of floor coating systems to ensure it will last. Some of the most common coatings we provide include:  Cementitious Urethane A heavy-duty industrial floor topping that is extremely resistant to impact, heat, and thermal shock. It can be applied at ¼” –…

Containment Dikes

TMI Coatings was hired to line interior of 3 containment dikes to contain petroleum products in the event of a spill or tank rupture. TMI FIBERLIFE vinyl ester resin with fiberglass mat reinforcement was applied to the interior of the three dikes. Per the facility engineer, Amanda Clark, it “looks really good and we may…

Floor and Wall Coating

A 6,000 square-foot floor repaired, coated, and walls painted to lighten and brighten a mechanic shop for repairs and for the customer experience. The owner said, “The floor looks exceptional. It’s holding up real good and I can’t say enough good things about it. I passed along contact information for TMI to a few people.”

FIBERLIFE for Caustic Storage Containment Dike

A zinc plating facility hired TMI Coatings to repair and line the floor and walls of their caustic storage containment dike. TMI mechanically abraded the area, but due to the extensive erosion on the concrete floor, TMI restored various areas to surrounding plane prior to application of the FIBERLIFE lining system. FIBERLIFE is a seamless…

TMI Installs Sloped Flooring at Fortune 500 Company

A Fortune 500 Company was renovating their (5) air handler units in one of their corporate buildings.  The company hired TMI Coatings to install liquid applied flooring sloping toward the existing drain in each of the air handler units; if the water does not drain, bacteria and allergens will be pushed throughout the system.  TMI…

Tnemec Stranlok for Jails and Prisons

Correctional facilities are not immune to deterioration and corrosion. Countless inmates, officers, and visitors put pressure on these structures over the years. For this specific prison, their showers were heavily corroded due to the constant weathering down of the floors and walls from water. The floors and walls developed considerable cracks and irregularities. The drains…

Bridge in Colorado Painted by TMI Coatings

TMI Coatings is refurbishing and painting all steel members of the Westminster Bridge in Denver, Colorado over US-36 including implementing traffic control, pedestrian control, concrete restoration and traffic deck coating.  

Protective Flooring at Manufacturing Company

A tortilla manufacturing company requested TMI Coatings install protective flooring at their facility in their Production and Packaging Areas totaling 13,000 square feet.  In the Packaging Area, 6,500 sq. ft., TMI installed an average of 25 mils thick flooring system with an “orange peel” finish.  The customer wanted a smoother finish to allow for easier…

ESD Flooring in Medical Manufacturing Facility

Have you ever dreamed of sliding across your manufacturing facility floor in your socks like Tom Cruise in “Risky Business”?  It is very unlikely and this isn’t exactly the same, but TMI Coatings recently installed an Electro Static Dissipative (ESD) and epoxy floor in a medical manufacturing facility.  The ESD flooring TMI installed is designed to…

Office Renovation With TMI CHEM-RESIST Flake Floor

How can an epoxy flooring system help increase light reflectivity and at the same time create a decorative look for a professional office space?  TMI Coatings recently showed a food production facility that epoxy floor coatings are not only suitable for extreme durability in constant wear areas but can also transform a dark stained concrete…

Lining Wastewater Pits at Biofuel Facility in Midwest

TMI Coatings completed lining wastewater pits and a containment area at a biofuel producing facility in the Midwest.  In the large containment area there was a deteriorated sheet membrane with punctures that the customer wanted removed.  The owner wanted a seamless 100% adhered lining to reduce the risk of chemical seepage. TMI removed the old…

Maintenance Shop Flooring in City Bus Terminal

TMI Coatings flooring crew apply sealer/dustproofer and epoxy flooring to multiple rooms in a city bus terminal after TMI painting crew completes wall painting.  Aggregate is used to reduce slipping to protect employees safety.  Epoxy line striping is added to the floors.  TMI applies approximately 65,000 square feet of maintenance shop flooring.  The crews work…

City Bus Terminal

TMI Coatings coated approximately 80,000 square feet of walls in multiple drive through, storage and maintenance rooms in a city bus terminal.  Two colors were chosen to help hide future grime from tires and exhaust on the lower portion of the walls while keeping the upper areas white to brighten the area.  TMI crews have…

Conductive Flooring for Electric Circuitry Company

An electrical circuitry company recently hired TMI Coatings to install a liquid-applied conductive floor topping to the concrete in a new addition at their facility.  The conductive flooring greatly reduces the chance of any unwanted sparks which could damage the electrical circuits during assembly.  This monolithic seamless floor topping was chosen over ESD floor tiles…

Epoxy Sealer/Dustproofer Floor Coating

TMI Coatings removed existing peeling and flaking paint from the floor of a power generation plant in Fridley, Minnesota. TMI then applied an epoxy sealer/dustproofer to keep the dust to a minimum and help keep the floor clean. TMI was able to complete this project on short notice and during weekend hours. The site contact…

Containment Dike Lining & Repairs

A natural gas company in Kansas contracted TMI Coatings to repair cracks and line the interior of a concrete containment dike. The containment dike was 55’ long x 20’ wide including up the walls 3’. TMI mechanically abraded the walls and floor by shotblasting and grinding with hand-held grinders. TMI then primed the entire area…

Protective Coating for Chemical Storage Area

TMI Coatings coated the floor and walls of a chemical storage area in Wisconsin with a chemical resistant protective coating to contain liquids in the event of a chemical spill or tank rupture.

Protective Coating Provides Slip Resistance for Safety

A Midwest state treatment center requested TMI Coatings install a protective coating to the concrete steps and deck of their facility entrance for slip resistance. The owner’s concern was that they had tried applying previous coatings in-house which had failed. The existing steps and deck had multiple layers of flaking coating and was very slippery…

Floor Sloping Eliminates Concerns

A Midwestern cheese plant had standing water on the floor of their production entryway and packaging area. The plant employees were standing in the water in order to cut the cheese. There were sanitary concerns due to splashing of standing water into the cheese carts where the blocks of cheese are temporarily stored before slicing.…

New Concrete Floor Coated 7 Days After Poured

TMI Coatings applied a cementitious urethane floor topping for a booming salsa manufacture that first sold its goods at farmers markets in the Midwest. A new production facility used for creating salsa required floors to be protected from the acidic constantly wet environment. The cementitious urethane floor topping was applied within 7 days after the…

Floor Topping Applied by TMI Coatings

TMI Coatings installed cementitious urethane floor topping with a smooth, sanitary finish as requested by the customer. Upon completion, the customer stated “job complete, everything looks great!”

Flooring Job Completed in a Timely Manner

A Midwest seafood retail and wholesale company requested TMI Coatings install protective flooring as part of their renovation. The company installed two new coolers and expanded the warehouse and production area. TMI prepared the surface by steel shotblasting with vacuum attachments. TMI then installed  cementitious urethane floor topping  at 1/4” thick. The cementitious flooring  has…

TMI Coats Chemical Containment Area

TMI Coatings completed FIBERLIFE coating on the interior of a large concrete containment pit. Our customer installed a new chemical containment area to contain sulfuric acid, nitric acid, and sodium hydroxide in the event of a spill and/or tank rupture. FIBERLIFE was chosen because it has superior chemical resistance to both acid and alkalis, is suitable…

TMI Restores Concrete and Repairs Floor for Manufacturer

A Midwest tool storage manufacturer requested TMI Coatings resurface eroded concrete areas.  TMI cleaned and filled cracks and deteriorated joints to restore concrete to the surrounding plane. Now when totes are driven across the floor, there is a smooth transition.  After restoration, TMI installed cementitious urethane floor topping. TMI has completed multiple projects over holiday…

CHEM-RESIST Mechanical Room Floor Coating

Gray and yellow CHEM-RESIST floor coating installed by TMI Coatings in a mechanical room.

TMI Applies FIBERLIFE to Containment Dikes

TMI installed FIBERLIFE to containment dikes that store harsh chemicals. The customer stated, “The crew worked very well with our coordinator for the execution of this project.” The customer said he will use TMI to install protective coatings at their other locations.

TMI Applies Epoxy Mortar Mixture to Air Handler Units

A Fortune 500 Company was renovating their (5) air handler units in one of their corporate buildings.  The company hired TMI to install liquid applied flooring sloping toward the existing drain in each of the air handler units; if the water does not drain, bacteria and allergens will be pushed throughout the system.  TMI applied an…

TMI Coatings Completes SafeLane™ on Parking Structure

TMI Coatings, Inc. applied Cargill SafeLane™ to ramp surfaces of a parking structure; SafeLane™ is designed for increased safety, increased mobility and infrastructure protection. This two coat polymer epoxy helps reduce ice or frost formation on surfaces while protecting infrastructure from corrosion and chloride intrusion. Cargill SafeLane™ creates an anti-skid surface to prevent slips and…

TMI Installs CHEM-RESIST Flooring at Manufacturing Facility

A  manufacturing facility requested that TMI Coatings recommend a flooring system for their injection molding area floor.  This company manufactures bronze outdoor signs and letters.  The floor is 7,000 sq. ft. and subject to foot traffic.  Approximately 900 sq. ft. has forklifts and pallet jacks running across it on a regular basis.  TMI installed a…

Safe & Durable Floor Coatings for Manufacturing Environments

A Midwest manufacturer of gear boxes, disc brakes and clutches requested TMI Coatings to recommend and install a floor coating in their machine area which was approximately 16,785 sq. ft. including striping in the aisles. The customer was ordering new machines and moving machines so this project had to be completed in four job mobilizations.…

Back To Top