Project Profiles

TMI Coatings relined a wheat storage silo for Grupo Bimbo to SSPC-SP10 standards with food-grade lining. AMPP QP 1 and QP 2 certified. 40 years in food processing coatings.

TMI Coatings relined two sugar storage tanks for Perfetti Van Melle with food-grade epoxy to SSPC-SP10 standards. Force-cured for compressed schedule. AMPP QP 1 and QP 2 certified.

TMI Coatings waterproofed silo bases at a food manufacturing facility with elastomeric coating over epoxy primer. One of TMI’s most frequently performed services. AMPP QP 1 and QP 2 certified.

TMI Coatings painted four storage tanks for POET, the world’s largest ethanol producer. Sherwin-Williams Macropoxy 646 plus Corothane 1. Firm deadline met. AMPP QP 1 and QP 2.

TMI Coatings painted a methanol storage tank and replaced a failed rubber containment dike liner with urethane elastomer coating. Dual-scope, single mobilization. AMPP QP 1 and QP 2.

TMI Coatings restored a 10-year-old rooftop helipad at University of Colorado Hospital, a Level 1 Trauma Center. FAA-compliant markings, anti-slip coating. AMPP QP 1 and QP 2.

TMI Coatings waterproofed a fertilizer tower roof with dozens of corrosion holes. Chlorid neutralization wash, scrim-reinforced penetrations, urethane elastomer. AMPP QP 1 and QP 2.

TMI Coatings painted nearly one mile of pipe and 100 supports at an ethanol plant. Epoxy primer plus urethane topcoat. Shutdown-scheduled. AMPP QP 1 and QP 2 certified.

TMI Coatings installed FIBERLIFE fiberglass-reinforced wall coating at a dairy processing facility. USDA-approved system with 17+ years of documented durability. AMPP QP 1 and QP 2 certified.

TMI Coatings waterproofed 5,500 sq ft of CHS grain storage rooftops at 120+ ft elevation. Asbestos abatement coordination, Sherwin-Williams epoxy primer. AMPP QP 1 and QP 2 certified.

TMI Coatings resurfaced cratered production floors at an agribusiness facility with Dur-A-Flex Poly-Crete SLB cementitious urethane system. Off-shift work. AMPP QP 1 and QP 2 certified.

TMI Coatings applied Tnemec Aerolon 971 thermal insulating coating at 100 mils DFT for hospital canopy condensation control. Mobilized within 10 days. AMPP QP 1 and QP 2 certified.

TMI Coatings repainted hundreds of linear feet of water treatment piping with Tnemec Series 138 epoxy mastic. Color-coded system. 20+ years deferred maintenance. AMPP QP 1 and QP 2.

TMI Coatings performed confined-space pipe painting 100+ ft below grade for Met Council. Sandblasting, three-coat PPG system. AMPP QP 1 and QP 2 certified contractor.

TMI Coatings restored spalling concrete and applied urethane elastomer waterproof roofing on silos at 100+ ft in North Dakota. Wall restoration included. AMPP QP 1 and QP 2.

TMI Coatings restored spalling concrete and applied waterproof coating on silos at three New Cooperative sites. Rebar protection, cementitious mortar, acrylic system. AMPP QP 1 and QP 2 certified.

TMI Coatings painted hundreds of linear feet of mechanical room piping in six-color coded system at cheese manufacturing facility. Congested space rigging. AMPP QP 1 and QP 2 certified.

TMI Coatings sandblasted and painted a 300,000-gallon tank in December using cold-weather coating technology rated to 0 degrees F. SSPC-SP6 prep. AMPP QP 1 and QP 2 certified.

TMI Coatings lined two chemical containment dikes at a refinery with urethane elastomer for polyphosphoric acid and FIBERLIFE vinyl ester for heat transfer oil. AMPP QP 1 and QP 2 certified.

TMI Coatings lined 10,900 sq ft anaerobic digestor tanks at dairy farm biogas operation. SSPC-SP10/SP13 prep, immersion-grade system. Three contracts awarded. AMPP QP 1 and QP 2.