Facebook pixel

Water/Wastewater

An Economical Solution To Corrosion Problems

TMI Coatings has considerable experience sandblasting and coating water and wastewater tanks. All our team members are confined space trained. TMI is also an Association for Materials Protection and Performance (AMPP) QP1 and QP2 certified contractor, demonstrating our competence, experience, safety, quality controls, and ability to complete any complex project.

Tank Linings to Prevent Corrosion

TMI Coatings contains, sandblasts and coats the exterior and interior of ground storage and elevated water tanks with Tnemec, Sherwin Williams, PPG and many other coatings. We have experience removing paint containing lead safely. TMI completes all work in accordance with OSHA 1962.62 and TMI’s Lead Removal Compliance Plan.

TMI Coatings will Select the Proper Protective Coatings for Your Tank

Whether the tank stores sulfuric acid, hydrochloric acid, bleach, or any other corrosive chemical, TMI has the experience in the selection and installation of protective coatings. TMI has completed lining tanks with Plasite, Dow Chemical, Ceilcote, Devoe and many other tank lining materials. With over 35 years experience and 7,500 successful installations, TMI is committed to completing quality work safely and on schedule.

Learn More About our Tank Lining Projects

Restoring Fiberglass Domes

Weathering and ultraviolet rays can cause fiberglass to deteriorate over time.  TMI Coatings’ crews high pressure washed to clean the domes’ structure prior to repairing voids and holes with fiberglass patch. A final gel coat was applied to all surfaces to improve longevity of the domes.  TMI Coatings’ EMR is .90. We use our own field…

Corrosion-Protective Tank Lining

A food processing and manufacturing plant requested TMI Coatings, Inc. (TMI) to line the interior of their dissolved air flotation (DAF) tank. The DAF tank is used in their water treatment process to break down wastewater by the removal of suspended matter such as oil and solids. The wastewater is corrosive and thus the steel…

TMI Lines FRP Water Treatment Tank.

The City of Greeley, CO, recently hired TMI Coatings, Inc. (TMI) to fiberglass line their 10,000 gallon FRP water treatment tank. TMI relined the FRP with glass fiber embedded in Novalac Epoxy resin to prolong the tank’s life. TMI mixed the resin with a catalyst or hardener, and fiberglass is a hand laid up to…

TMI Repairs Water Tank For The Green Mountain Water And Sanitation Department In Colorado

The Green Mountain Water and Sanitation Department of Lakeland, Colorado recently awarded TMI Coatings the repair of their 2.0 million gallon buried water tank which was leaking. TMI abrasive blast cleaned and repaired the existing concrete water tank and relined the interior concrete tank surfaces including the floors, walls and pipe penetrations. The new lining…

Brodhead, WI Wastewater Treatment Facility Domes Recoated

The TMI Coatings team recently completed a recoating project for the City of Brodhead Wastewater Treatment Facility. The facility has two fiberglass domes, each 45’ in diameter with a connecting entrance area of 13’ long. The total work area for the project was 7,000 sq. ft. TMI pressure washed the fiberglass domes with up to…

Back To Top